|
Intelligent
battery charger |
Top of Page |
Unlike most other "dumb fast chargers", you can finally
safely rapid charge your AA, AAA, C, and D Nickel Metal Hydride and
NiCD rechargeable batteries! With the ALLTEK™ AT-5798 PRO's intelligent
microprocessor design, your batteries will be at their peak performance at
all times. Plus you can simultaneously charge two 9V NiMH or NiCD
batteries - Yes at the same time.
Battery
conditioning |
Top of Page |
Another great feature on the AT-5798 PRO charger is its added conditioning
capability, which will rejuvenate your batteries to
their best performance by subjecting them to a automatic discharge /
charge cycle. User intervention not required.
Dual
charging circuits |
Top of Page |
The intelligent ALLTEK™ AT-5798 PRO features two independent banks, able
to perform different functions simultaneously. This means you can charge
two unique sets of two batteries. You can put two NiMH AA in one bank and
two NiCD AAA in the other bank or even two C or D size batteries, all
automatically. Plus you can charge two 9V batteries at the same
time. IT'S LIKE HAVING THREE CHARGERS in ONE!
Use
in mobile & car |
Top of Page |
Operate the charger in your car, boat, RV, or any 12V power source with
the optional 12V power cord.
Features
& Specifications: | Top of Page
|
- Charges "AA",
"AAA ", "C", "D', or 9V size battery cells.
- Will fully charge your
rechargeable batteries regardless of the batteries capacity.
- Charges either rechargeable NiMH
or NiCD battery cells.
- Built-in Microprocessor controller with
Trickle Charge
- Built-in Conditioner for Discharging
NiMH or NiCD Batteries
- Current Sensing IC switches to Normal
Charge Cycle after Conditioning
- Selectable Conditioning Cycle. Use only
when needed.
- Two or Four Cell Charging - Charge Time
60-160 Minutes .
- Two independent charging and discharging
circuits
- Capable of simultaneous charging and /or
discharging.
- 0deltaV and 0deltaT
based detect circuitry .
- AA, AAA, C, D Charge Current :
Constant Pulse 800mA
- 9V Charge Current : 13mA
- Trickle Charge Current :
24mA
- AA, AAA, C, D Discharge Current :
300mA
- Unit has a protective
spring loaded plastic lid. Helps protect unit from spills while
charging.
- Power Supply input Voltage required :
12VDC
- AC Adapter Included : Adapter Input 120V
AC ~60Hz - Output: 12v DC 800mA
- Simply charge your
batteries fully, and then just leave them in the ALLTEK™
AT-5798 Charger.
- Maintain a continued
full charge condition and your batteries
" will always be ready for use " One set to use while
charging another set.
- Total Weight with AC
Adapter : 33.2 OZ. - Without AC adapter 16.5 OZ.
- Dimensions :
5.75" W x 8" D x 2.75" H
| Top
of Page |
|
